Proper mowing practices are essential in maintaining a quality lawn. Frequency and mowing at the proper height are two main factors in having a healthy looking lawn. This practice in conjunction with proper watering facilitates spreading of desired grasses into bare spots. Do not remove more than 1/3 grass height at one time.
Mowing heights: (1) Before green-up — 1 inch/scalp to remove dead grass. (2) Spring — 1½ inches. (3) Summer — 2 inches. (4) Fall — 2½ inches.
Another critical factor in mowing is maintaining a sharp mower blade. A sharp mower blade makes a clean cut, which heals quickly with a minimum of moisture loss. A dull mower blade makes a blunt uneven, ragged, damaging cut which takes longer to heal resulting in more moisture informative speech about music loss, browning tips, and increased disease susceptibility.
Other good mowing practices include not mowing grass during the hottest part of a day or when the turf is showing signs of heat stress. A hot lawnmower going over a hot lawn during hot weather will cause a quick heat stress browning effect within 24 hours.
Watering is a challenge. Knowing when & how much to water along with the best time can be frustrating. We’ve put together this guide to help you with your watering needs to optimize the treatments to your lawn.
How Much Do I Water?
Water enough to wet the soil to a depth of four to six inches. You can use a screwdriver to check the depth. If it’s hard to push into the lawn or you can’t push it in all the way to the handle you need more water.
When To Water?
Turfgrass takes on a dull, dark appearance & leaves begin to roll when they need more water & in some cases turns yellow/brown in color. The best time to water is early morning or late evening when winds are calmer & temperatures are lower.
Determine Watering Amount
1. Determine how much water your sprinkler applies
2. Set your system to run according to the time of year & weekly rainfall conditions applying ½” per watering.
3. Subtract any rainfall from the required watering totals to determine how & when to water.
Sandy soils require more frequent watering while loam & clay soils require cycled watering to avoid a runoff. Slopes may also require cycled watering to avoid an excessive runoff.